IBC Spill Pallet for 1 x 1000ltr IBC – No Deck (BB3) | IBC Bunding Ireland
The BB3 is a heavy-duty polyethylene IBC spill pallet providing compliant secondary containment for a single 1000-litre Intermediate Bulk Container. Manufactured from 100% corrosion-free MDPE, the BB3 uses integral support columns rather than a removable deck delivering a lower-profile, easier-to-clean solution for single IBC storage in Irish warehouses, yards, and chemical handling areas.
What is an IBC Spill Pallet and Do I Need One?
Any business storing hazardous liquids in a 1000-litre IBC in Ireland is required by law to place it on a compliant secondary containment bund. An IBC spill pallet acts as a second line of defence: if the IBC leaks or fails, the sump beneath it captures the entire contents, preventing ground contamination, watercourse pollution, and the severe penalties that follow an uncontained spill.
The BB3 delivers a 1,125-litre sump exceeding the Irish EPA and EU minimum requirement of 110% of the largest container (1,000 litres x 110% = 1,100 litres minimum). This 25-litre margin provides a meaningful compliance buffer under typical operating conditions.
No Deck vs Deck: Which IBC Pallet is Right for You?
A no-deck IBC pallet (like the BB3) supports the IBC on integral moulded columns directly above the sump. This design allows straightforward visual inspection of the sump, easier cleaning, and unobstructed access to the IBC base and drain valve without removing a grid.
If your site requires more frequent pallet movement via forklift with the IBC installed, or if you prefer a defined working surface around the IBC, consider the BB1 (removable deck with forklift entry). For outdoor use in Ireland, the covered BB2C or BB1C models are recommended.
IBC Spill Pallet for 1 x 1000ltr IBC (no deck) – BB3
Manufactured from 100% corrosion free polyethylene for broad chemical comparability this single IBC secondary containment spill pallet is ideal for 1 x 1000ltr IBC. It has integral support columns, instead of decking, as well as fork pockets and is fully complaint with all UK, EC and Worldwide bunding regulations.
Specifications
Length: 1590mm
Width: 1455mm
Height: 715mm
Weight: 77kg
Sump: 1125ltr
UDL: 1500kg
Key Features – BB3 IBC Spill Pallet
- 1,125-litre sump exceeds mandatory 110% containment for single 1000-litre IBC
- 100% polyethylene construction corrosion-free, UV-stable, and chemically resistant
- Integral support columns replace a conventional deck for easier inspection and cleaning
- Forklift pockets for safe loading and repositioning 1,500 kg UDL
- Fully compliant with Irish EPA, EU IED 2010/75/EU, and worldwide IBC bunding standards
- Suitable for oils, chemicals, solvents, acids, alkalis, and non-flammable bulk liquids
FAQ – BB3 IBC Spill Pallet
What is the minimum bund size required for a 1000-litre IBC in Ireland?
Under Irish EPA and EU Industrial Emissions Directive regulations, the containment bund must hold at least 110% of the largest container meaning a minimum of 1,100 litres for a single 1000-litre IBC. The BB3 provides 1,125 litres, comfortably meeting this requirement.
Why does the BB3 have no deck?
The BB3 uses integral support columns instead of a removable grid. This provides a cleaner, lower-maintenance design easier to inspect and clean while fully supporting the IBC and meeting all bunding standards.
Can the BB3 be used outdoors in Ireland?
The BB3 is suitable for outdoor use, but in Ireland’s high-rainfall climate, an uncovered sump can fill with rainwater rapidly. For outdoor IBC storage, SSI recommends the soft covered BB1C (single) or BB2C (double) IBC bunds to protect sump capacity year-round.
What chemicals is the BB3 compatible with?
The 100% polyethylene construction gives the BB3 broad chemical resistance, covering oils, fuels, solvents, acids, alkalis, and most industrial chemicals. For flammable liquids, consult SSI Environmental for appropriate storage guidance.
To enquire about this product – call us on 01 8665676 / 087-9367065 or contact us here